STERILIZATION CHAMBER: The sterilization chamber has a quadrangular section, in mirror polished ANSI 316L austenitic stainless steel, of adequate thick-ness for the relative pressure (¬1 to 2.5 bar) and operating temperatures up to 134(C, which is also corrosion and to the operating thermomechanical cycles.
POWERFUL VACUUM SYSTEMS : The appliance has a powerful vacuum system consisting of a sin-gle-stage pump with a liquid ring that ensures excellent removal of the air during the pre-vacuum stage and excellent drying during the post-vacuum stage. The pump is instilled on special anti-vi-bration mounts that reduce noise whilst ensuring high levels of protection. By using steam/vacuum pulses during the pre-vacuum stage, all the air is removed to ensure excellent penetrability of the steam inside the load.
TOUCH SCREEN DISPLAY : The control display has an actual display size of 4 inches colour touch screen. Various pages appear on the display, however, the following always appear.
◉ Main menu ◉ Process control ◉ Cycle library ◉ Maintenance instruction ◉ Cycle parameters ◉ Alarms
◉ Data regarding the load (operator, batch) ◉ Calendar control Various messages (Door status, Temperature, Pressures, Vacuum, etc.)
◉ General Systems conditions for the start of the cycle ◉ Diagram of the process variables in real time ◉ Scheduled maintenance.
PRINTER : The data indicated are those referred to the basic sterilization parameters and every change in phase besides the date, time, cycle result, operator code, batch, FO, etc. Furthermore the cycle number is also indicated in sequential order together with the diagram indicating the pressure and temperature. Thanks to the management system designed and created by SHARKCLAVE, which allows the continuous comparison of the parameters detected by the management system as well as the control system (safety), the print report at the end of the cycle will contain the direct certifi- cation whether the cycle has completed successfully or it has failed.
STERILIZATION CYCLES
The following cycles can be obtained :
1. Sterilization cycle at 134°C for 5 min. for textiles, porous mate-rials in general, empty glassware and in any case, for anything that is temperature resistant.
2. Sterilization cycle at 121’C for 20 min. for gloves, catheters and rubber materials in general
3 Sterilization cycle at 134°C for 5 min. for surgical instruments
4. Prion sterilization cycle at 134°C for 18 minutes
5. Flash sterilization cycle at 134°C for 3 min. (OPTIONAL) for instruments that are not packaged
6. Steam penetration test cycle (Bowie & Dick)
7. Vacuum tightness test cycle for 10 min Open cycle from 01 up to 20 pre-set as textile cycles)Specifications
| S.NO. | ||||
|---|---|---|---|---|
| 1 | HARSD 224 Auto | Horizontal Rectangular Single Sliding Door | 600 Wx 600 Hx 1200 L | 432 Ltr |
| 2 | HARDD 224 Auto | Horizontal Rectangular Double Sliding Door | 600 W x 600 H x 1200 L | 432 Ltr |
| 3 | HARSD 234 Auto | Horizontal Rectangular Single Sliding Door | 600 W x 900 H x 1200 L | 648 Ltr |
| 4 | HARDD 234 Auto | Horizontal Rectangular Double Sliding Door | 600 W x 900 H x 1200 L | 648 Ltr |
| 5 | HARSD 235 Auto | Horizontal Rectangular Single Sliding Door | 600 W x 900 H x 1500 L | 810 Ltr |
| 6 | HARDD 235 Auto | Horizontal Rectangular Double Sliding Door | 600 W x 900 H x 1500 L | 810 Ltr |
